|
 
|
|
|
|
CAT
NO |
PRODUCT
DESCRIPTION |
|
STUDIO IN A BOX KITS: |
PA0001
 |
The smallest of the
London kits, the Z12 is a combination of absorbing treatments
designed for each wall in a typical control room or project studio.
More Information on London Series Z12 Kit
General Information on the London Series Kits |
PA0002
 |
The London Z14 is a combination of absorbing
treatments designed for each wall in a typical control room or project
studio.
More Information on London Series Z14 Kit
General Information on the London Series Kits |
PA0003
 |
The London Z15
uses larger Europa and Scandia wall systems. The Europa Z83 expands front
wall coverage to approximately 8 feet wide. A pair of Orientique Z33 are
placed to control side wash reflections in the sweet spot.
More Information on London Z15 Kit
General Information on the London Series Kits |
PA0004
 |
The London Z16 uses the Europa Z83 to expand
front wall coverage to approximately 8 feet wide. Two pairs of Orientique
Z33 are placed to control side wash reflections and side to side flutter
echoes.
More Information on London Z16 Kit
General Information on the London Series Kits |
PA0005
 |
New York
36 Wall Suite - Using Primacoustic W-Foam and accessories you can easily
create practical budget-conscious solutions to your most critical studio
acoustic challenges. Bringing this concept to completion is easy with the
New York 36 WS Voice Over kit.
More Information on New York 36 Wall Suite
General Information on the New York Series |
PA0006
 |
New York
Z64 Voice Over Booth - Very small rooms like voice over booths
have huge acoustic problems with standing waves and bass management. New
York kits are designed to remove the acoustic finger print of the room and
provide a near "dead" recording space
More Information on New York Z64 Voice Over Booth
General Information on the New York Series
|
PA0007
 |
New York
Z75 Voice Over Booth - Besides the 3" thick
by 12" wide by 40" high Z-Foam panels, the Z75 kit includes eight MB40
mid-bass traps to control the lower registers of the vocal range.
More Information on New York Z65 Voice Over Booth
General Information on the New York Series |
PA0008
 |
New York
Z98 Voice Over Booth - Besides the 3" thick by 12" wide by 40" high
Z-Foam panels, the Z98 kit includes eight MB40 mid-bass traps to control the
lower registers of the vocal range.
More Information on New York Z98 Voice Over Booth
General Information on the New York Series |
PA0009
 |
The
Montreal MZ14 includes 16 Z-Foam anechoic wall panels and a total of 84
Scandia wedge tiles. The Z-Foam panels can be spaced or butted up against
each other.
More Information on Montreal MZ14
General Information on the Montreal Series Kits |
PA0010
 |
The
Montreal MZ16 SQ (Super Quiet) includes the same Z-Foam anechoic wall
panels and Scandia wedge tiles as the MZ14, but adds 4 Australis bass traps
to the package
More Information on Montreal MZ16 SQ
General Information on the Montreal Series Kits |
|
WALL AND CEILING SYSTEMS: |
PA0011
 |
Europa Z63
Flutter Wall - The Europa Flutter Wall is a broadband acoustical absorber and an
ideal starting point for the recording studio or control room. Europa
effectively absorbs offending primary reflections, 'front to back' standing
waves, slap echo, and room flutter for improved imaging and reduced ear
fatigue.
More Information on Europa Z63
Flutter Walls
General Information on the Wall & Ceiling Systems |
PA0012
 |
Europa Z83
Flutter Wall - The Primacoustic Europa is the first and most important
acoustical treatment for a studio. Europa absorbs standing waves, room
chatter, flutter echo and back reflection from the monitors.
More Information on Europa Z83
Flutter Walls
General Information on the Wall & Ceiling Systems |
PA0013
 |
Orientique
Z83 Washboard - The Orientique Washboard improves definition by
absorbing primary reflections and side-wash that smear the stereo image. It
reduces listening fatigue and helps absorb ‘side to side’ flutter echo.
More Information on Orientique
Z83
Washboards
General Information on the Wall & Ceiling Systems |
PA0014
 |
Scandia 74
Scatterblock - The Primacoustic Scandia creates a diffuse sound field
for a more natural mix environment by breaking up ‘front to back’
reflections, reducing tiresome standing waves and flutter echo.
More Information on Scandia
74 Scatterblocks
General Information on the Wall & Ceiling Systems |
PA0015

|
Scandia 84
Scatterblock |
PA0016

|
Scandia 85
Scatterblock |
PA0017

|
Scandia 95
Scatterblock |
PA0019
 |
Venice
Wide Band Panel - The Venice series provides you with both ultimate room
aesthetics and symmetrical pattern control in one easy to install system.
Integral backboards provide a complete acoustic solution.
More Information on
the Venice Panel
General Information on the Wall & Ceiling Systems |
PA0020
 |
Cloud 9
Ceiling Panel - Cloud-9 makes treating the ceiling easy! Complete with
backboards, installing Cloud-9 only takes a few minutes. Once up, you will
enjoy tighter imaging and a larger sweet spot.
More Information on the Cloud 9 Ceiling
Treatment
General Information on the Wall & Ceiling Systems |
|
PRIMAFOAM COMPONENTS: |
PA0021
 |
Z-Foam
Anechoic Panels (24) - Made from high-density, open-cell acoustical
foam, Z-Foam is 3” thick to provide effective mid and high frequency
absorption (from 500Hz & up.
More Information on Z-Foam Panels |
|
PA0022 |
Z-Foam
Panels (12) |
|
|
PA0023 |
Z-Foam
Panels (16) |
|
|
PA0024 |
Z-Foam 12B |
|
PA0025
 |
W-Foam
Panels (8) - W-Foam panels are cost
effective 2" thick acoustic foam that combines the absorption of
high-density open-cell foam with the flexibility of easily integrated
components.
More Information on W-Foam Panels |
PA0026
|
Australis
Corner bracket (2) - The Australis corner-mounting wall bracket is a
resonant-free, heavy-duty steel shelf that installs in minutes without
marring walls.
|
PA0027
 |
Corona
Crown Wedge (4) - Following the traditional architectural crown molding
look, the Corona Wedge controls low, mid and high frequencies for a more
balanced sounding room. Designed to work in conjunction with the Cube Trap,
the Corona is installed at the wall to ceiling corner joint.
|
PA0028
 |
Pin Strip
Filler (16) - The Pin Strip is a simple and elegant add-on that can turn
a basic installation into a finished room. Designed to mate with W-Foam and
Z-Foam panels, the Pin Strip is used to break up a wall pattern and create
attractive and architecturally interesting designs.
|
PA0029
 |
Mid Bass
Trap (4) - The Mid Bass Trap helps reduce low end rumble and 'chest
hump' commonly present in vocal booths and studios. Designed to be
positioned at the wall to wall joint, the Mid Bass Trap installs easily and
provides a professional finished touch to your acoustic installation.
|
PA0030
 |
Cube Trap
(4) - The Cube Trap low frequency absorber simplifies installation of
other Primacoustic components (e.g.: Mid Bass and the Corona wedge traps) by
providing a corner joint that when combined with the other components,
creates a finished crown and moulding look to any room. |
PA0031
 |
WK112
Wedge Kit (12) - Wedge Trim Tiles are used in most Primacoustic systems
including London, Europa and Scandia kits. Create a finished border that
adds a professional look to your installations.
|
|
PA0032 |
WK136
Wedge Kit (4) - 36" |
|
|
PA0033 |
WK140
Wedge Kit (4) - 40" |
|
|
PA0034 |
LN510
Primabond Adhesive |
|
|
PORTABLE GOBOS: |
PA0035
 |
Freeport
SD Mobile Panels (2) - Go anywhere acoustic Gobos. Same great design as
the Freeport XT below but with 2.75" thick Primafoam Wedge tiles for a
different look.
More Information on the Freeport SD Mobile Panels |
PA0036
 |
Freeport
XT Mobile Panels (2) - Freeport is a
flexible acoustical absorber that features a 24” x 48” panel section made
with 3" thick Primafoam Z-Foam high-density open-cell acoustical foam for
maximum absorption in the critical mid and upper bands.
More Information on the Freeport XT Mobile Panels |
PA0037
 |
Freeport
GT Mobile Panels (2) - The
Freeport GT is a cost effective gobo that sets up in minutes to help you get
the most out of your recording. Use side-by-side or stack around amps and
drums.
More Information on the Freeport GT Mobile Panels |
|
BASS TRAPS AND DIFFUSERS: |
PA0038
|
Razorblade
Quadratic Diffuser - The Razorblade is a high-performance quadratic
residue diffuser that employs a series of 15 wells of specific depths to
break up and scatter acoustic energy.
More Info on the Razorblade Quadratic Diffuser |
PA0018
 |
Australis
Bass Trap - The Primacoustic Australis is a high-efficiency bass trap
that controls low frequency energy. Introducing Australis into a studio will
result in a tighter, more controlled bass.
More Information on the Australis Bass Trap |
PA0039
 |
PF L24C
Corner PolyFuser - The Polyfuser brings forth an innovative design that
combines the performance of an elliptical diffuser with a broadband bass
trap. Attractive and modular design will fit in any room.
More Information on the PolyFuser Diffuser |
|
PA0040 |
PF L24M
Middle PolyFuser |
|
PA0041 |
PF L48C
Corner PolyFuser |
|
PA0042 |
PF L48M
Middle PolyFuser |
PA0043
 |
IP4 ISO
Plane (4 Pack) - Iso Pads ensures
that your monitor speakers are acoustically isolated in your room so that
you are hearing a true representation of your sound. Available in two
styles, 6° Wedge and 0° Planar. High density, low compression foam capable
of supporting any size and weight of monitors. The IsoPlane is a
multi purpose isolation kit for use with monitor speakers, turntables, CD
player/burners and other devices. Each kit contains 4 pieces of high-density
low compression foam
More Information on the ISO Plane |
PA0044
 |
IW4 ISO
Wedge (4 Pack)
More Information on the ISO Wedge
|
|
PA0045 |
IP10 ISO
Plane (10 Pack) |
|
|
PA0046 |
IW10 ISO
Plane (10 Pack) |
|
|
|
|
|
|
|
|
|
|