|
|
| "Violett
TV Active" |
|
|
ONE
& ONE near field monitor
-
-
wide
and smooth frequency response
-
-
extremely
low distortion - even at
high
listening
levels
-
-
perfect imaging matched systems
with less than +- 0,5 dB
We
have designed this monitor for everyone that
loves to have the most detailed precision
possible, while mixing, editing and/or
mastering!
Only highest quality components - like the
18cm Carbon/Paper woofer, and the unusual 28mm
silk dome - are used to reach a perfectly
matched system. In any combination of 2 - 6
channel systems we garanty a max pair
difference of +- 0,5 dB
A
very extreme design feature to the violett HR
is the very, very low x-over frequency of
1.200 Hz. We always try to go as low as
possible in a two way system, because all
woofers with a diameter over 10cm allready
"break up" (uncontrolled polarity
pattern) very early (1 kHz).
A
perfect system for all applications within a
listening distance from 80 to 300cm
|
 |
| System |
VIOLETT
HR active |
|
construction
|
2
way bass-reflex
|
|
concept
|
One
& One Monitor with Wave-guide
|
|
fc
responce free field
|
58
- 20.000 Hz +/- 2 dB
|
|
fc
responce in wall
|
55
- 20.000 Hz +/- 1,5 dB
|
|
system
low fc responce
|
52
Hz - 3 dB
|
|
max.
sensitivity
|
107
dB
|
|
max.
sensitivity long term
|
105
dB
|
|
harmonic
distortion at SPL <100Hz
|
0,8
%
|
|
harmonic
distortion at SPL >100Hz
|
0,4
%
|
|
Bass
driver
|
1
x 8" carbon paper
|
|
Midrange
driver
|
-
|
|
Hf
driver
|
28mm
Neodyme
|
|
shielded
(anti magnetic)
|
-
|
|
weight
|
14,6
Kg
|
|
dimensions
w/h/d in mm
|
210
x 380 x 250 mm
|
|
pair
difference
|
+/-
0,5 dB
|
| Electronic |
VIOLETT
HR active |
|
number
of amplifier
|
|
|
power
handling rms Lf/Hf
|
|
|
power
handling peak Lf/Hf
|
|
|
connector
type
|
|
|
input
impedance
|
|
|
input
sensitivity
|
16
steps, from 0,45 - 4,5V
|
|
X-over
fc
|
|
|
low
pass filter
|
|
|
Hf
level control
|
16
steps, from -4 dB - + 4 dB
|
|
Lf
gain control
|
16
steps, from -6 dB - + 4 dB
|
|
distortion
at acoustic max. output
|
|
|
signal
to noise ration
|
|
|
kind
of power supply
|
|
|
operating
voltage
|
|
|
power
consumtion at max. output
|
|
|
| The
System |
The
Technology |
The
Electronics |
The
cabinet construction uses the bassreflex
principle, the 28mm silk dome driver is
mounted from the back of the front,
leading into a radial wave guide. This
guranties a perfect pattern, low
distortion and smooth linearity over a
wide range.
The "liquid" front design (srew-,
bumps-, dipless) support all the
eminated enegie without disturbance. |
As
woofer/midrange driver we use a modified
carbon-paper membrane driver of europes
leading high Q driver manufacturer. It's
the most non coloring chassis we ever
had in hand, because a woofer that has
to be still perfect at 1 kHz is quite a
challenge! The most critical part in the
VIOLETT's are the tweeters, these little
drivers have to generate frequencies
lower than 1,2 kHz!!
We found only two companies who are able
to design such - and we chosse - for
sure - the best one! |
Two
complete separated channel stripes are
used to keep the electronic crosstalk to
a minimum Each of these have identical
amplifier - this means the tweeter has
the same amount of power in the back as
the woofer. A design feature that we
never want to miss, because distortion
created by different designs or varying
power output is not what we want! Our
s.c. "quick delivery" -
digital power- supplies is build with
the same goal in mind it works 2.000
times faster as analog one's and are way
less heavy in weight. On the back you
will find 16 step dips for the input
sensitivity, for low fc control (-6 to +
4 dB), and the hf-section (-4 to +4 dB. |
|
|
Used
for:
-
 RECORDING
BROADCAST
FILM/VIDEO
EDITING
MASTERING
SOUND-DESIGN
in STEREO (L/R) and/5.1
Surround
Sound
urround
Sound
System
|
|
Back
to EMES Products
|
|
|