|
 |
| General |
|
Standard
light pipe cable with TOSLINK connectors. Approved RME
quality. Available in different lengths:
| Part
no |
Description |
|
RME-OCL-1 |
Optical
cable, Toslink, 3.3 ft (1 m) |
|
RME-OCL-3 |
Optical
cable, Toslink, 9.9 ft (3 m) |
|
RME-OCL-5 |
Optical
cable, Toslink, 16.4 ft (5 m) |
|
| Hammerfall
DSP Series
|
 |
Original
RME 19" universal rack holder for Digiface and Multiface.
Two units can be installed side by side in any combination. The rack
holder also includes holes for nearly all 19" half-rack units from
other manufacturers.
| Part
No |
Description |
|
RME-Rack |
19",
1 U height universal rack holder |
|
 |
6-pin/6-pin
FireWire cable in RME approved quality. Available in different
lengths:
| Part
No |
Description |
|
RME-FWK-1 |
Firewire
cable IEE1394 6M/6M, 3.3 ft (1 m) for MultiFace |
|
RME-FWK-3 |
Firewire
cable IEE1394 6M/6M, 9.9 ft (3 m) for
MultiFace |
|
RME-FWK-5 |
Firewire
cable IEE1394 6M/6M, 16.4 ft (5 m) for
MultiFace |
|
|
Original
RME Repeater for the HDSP system. Can not be used as FireWire
repeater! The Repeater
is an active buffer, which allows to double the cable length, and to
break the ground between input and output. A maximum of two Repeaters
can be used, which means up to 100 ft (3 x 32.8 ft) between interface
and I/O box.
| Part
No |
Description |
|
RME Repeater |
RME
FW Repeater for Digiface/ Multiface 6F/6 |
|
| Part
No |
Description |
|
RME-FWCB-1 |
PCMCIA Cable for Multiface – 1 metre |
|
RME-FWCB-5 |
PCMCIA Cable for Multiface – 5 metre |
|
RME-PM-3 |
QuadMic Patch
Cable – 1 metre |
|
RME-MKH |
XLR Cable for HDSP 9632 |
|
| |
