List of current and older
driver updates
Windows 2000/XP Driver
Version 2.94(3) (FUT
15_106_53_152): Inf
file updated for new
firmware 15 and 53 (PCI and
CardBus). Bugfix 96 kHz:
channel 1 playback distorted
when SPDIF signal present.
(12/2005)
Version 2.94(2) (FUT
14_106_52_152):
TotalMix: Fixed small memory
leak. Automatic submix
selection when activating
Monitor Main/Phones. MIDI
Remote: Starting TotalMix
via a click on the systray
symbol refreshes the
LC-Display. (11/2005)
Version 2.94(1) (FUT
14_106_52_152):
Bugfixes for HDSP 9632:
TotalMix settings were not
loaded correctly after
Standby/Hibernation. Quick
Access Panel graphics reset
added. Level meter display
problem (numerical) in some
specific situations - fixed.
General: TotalMix MIDI
remote: Mute and solo
buttons were not always
displayed correctly.
(09/2005)
Version 2.94 (FUT
14_106_52_152):
TotalMix: Since 2.93(3) ASIO
Direct Monitoring had been
inactive. Internal Loopback
optimized (digital I/Os).
(07/2005)
Version 2.93(3) (FUT
14_106_52_152):
TotalMix: Performance
improved when Matrix window
is open. Tooltip is turned
off when window is closed
via ESC. Tooltip is turned
off when mouse is moved
quickly across the window
border. Graphical problems
with 9632 and RPM fixed.
General: Plug and Play
behaviour of the Settings
dialog optimized. Internal
bugfix (registry access)
which did not cause any
trouble so far. (07/2005)
Version 2.93(1) (FUT
14_106_52_152):
HDSP series: ASIO offset
values added. Dummy GSIF-2
MIDI ports are now fully
functional. MME MIDI In and
GSIF-2 MIDI In can be used
simultaneously. Bluescreen
fixed on power-down of
certain computers (W2k SP4
Dual CPU). TotalMix: Small
error fixed in factory
preset of RPM and HDSP 9652.
Tooltip no longer sticky
when 'Always On Top' is off.
Systray context menu
improved, new entry
'Matrix'. Matrix window
titlebar shows current
preset. Digiface: 'Emphasis'
is valid for the analog
Phones output too. Digiface,
Multiface, HDSP 9652, HDSP
9632: Option 'SyncAlign'
added to Settings dialog.
HDSP 9652: Option 'Word
Clock Out: Single Speed'
added to Settings dialog.
Internal loopback in
TotalMix removed - not
possible with this card.
(06/2005)
Version 2.92:
Bugfix Digiface, Multiface,
RPM: disabled internal
loopback got reactivated by
fader movements and MIDI
data. HDSP9632: DDS
implementation had been
incomplete (ASIO), causing
several errors. (05/2005)
Version 2.91:
TotalMix: Performance
improved when MIDI option
LC-Display is active. MIDI:
Cursor up/down no longer
jumps to other
channelsDigiface/Multiface
only: Quick Access Panel no
longer active when only
output row is visible.
HDSP9632: New hardware
(Flash Update 152) with
internal loopback, DDS and
improved ADAT receiver. DDS
added to settings dialog.
Internal loopback can be
activated via TotalMix.
(05/2005)
Version 2.90(1):
New TotalMix with Monitor
Panel, MIDI support and a
lot more improvements.
Digiface/Multiface: changed
order of AutoSync sources,
Word is now on top. Improved
ADAT receiver. New option
Word Clock Out Single Speed.
Digiface/Multiface/RPM:
support for internal
loopback. With Flash Update
Tool 13/51:
Digiface/Multiface: Bugfix
communication problem at
certain sample rates. Note:
the MME driver based
Host-controlled automatic
monitoring (Samplitude,
Sequoia, SAWStudio) is no
longer supported. (05/2005)
Version 2.831:
Improved initialization of
Digiface/Multiface/RPM when
reconnecting it. Support for
HDSP9652 firmware 105.
(04/2005)
Version 2.83:
Completely rewritten code
for loading the mixer
settings on boot-up.
(03/2005)
Version 2.82 (a):
Internal signal error in the
RPM hardware caused sample
errors on the left channels.
TotalMix displays invalid
routings, which are
generated when changing from
single to double speed, as
blank field (RPM/Multiface).
New TotalMix: 'Link Faders'
activates a global stereo
control of all faders
(hotkey L). (07/2004)
Version 2.82:
AutoSync mode now also
prevents sample rate changes
when ASIO is running in
double or quad speed mode.
When using multiple CardBus
or PCI cards: ASIO can be
used even when not all I/O
boxes are connected to the
installed CardBus/PCI cards.
False RPM detection
hopefully improved. Bug fix:
The setting 'Pref Sync Ref'
wasn't used by the hardware.
Settings dialog shows up in
Systray, even if the CardBus
is not inserted when booting
the laptop (but TotalMix
does not work without a
reboot. This mechanism will
be changed later to the one
of the Fireface). (06/2004)
Version 2.81:
'Always on Top' deactivated
in TotalMix caused delayed
playback/recording up to
freezes of the audio
software. (05/2004)
Version 2.80:
Floating point calculations
in TotalMix could cause a
crash of TotalMix.
Scrollwheel used in TotalMix
causes changed Preset
indication. Not initialised
variable in the ASIO driver
could cause ASIO to stop in
multi-client operation. In
seldom cases the MIDI driver
could cause a freeze of the
computer. Bypass mode of the
RPM is now defaulting to
'Phono 0 dB' until the
driver is loaded. (05/2004)
Version 2.7a:
MME playback changed RPM
Input 1/2 from Phono to
Line. TotalMix: graphics
error when using scroll
wheel in third row fixed.
(04/2004)
Version 2.7:
General news, changes and
fixes - Driver: Added
complete support for the
RPM. Full GSIF 2.0 audio
support (record and
playback). TotalMix settings
of HDSP 9632 and HDSP 9652
are automatically reloaded
after sleep mode. At first
time installation of
Multiface/Digiface/RPM a
default routing
configuration is loaded into
the mixer. MME: In AutoSync
mode, a request for a
different sample rate than
the input one (caused a
change to Master mode) is no
longer supported. ZLM did
not work correctly in double
speed mode. Digiface only:
in double speed mode,
sequential start of the
record devices caused
channel 3/4 to become
corrupted. TotalMix: Added
vertical scrolling in
TotalMix mode,
horizontal/vertical
scrolling with floating
labels in Matrix mode. Added
Delete (menu Edit or
Del-key). Added scroll-wheel
support. Release time of the
Level Meters in Double and
Quad Speed mode corrected.
ASIO Driver: Using more than
2 HDSP devices caused the
ASIO channel list to become
corrupted.
HDSP 9632 Specific:
New firmware with several
improvements. Word clock
input has been out of phase
(180°). RMS calculation
(TotalMix, HDSP Meter
Bridge) did not work
correctly on some channels,
especially at higher sample
rates. SPDIF receiver has
not been fully compatible (Tascam
DA-30 did not work). Word
clock input now supports
quad frequency ratio. Word
clock output now supports
double and quad speed
frequency. Frequency
indication AES Channel
Status on output for quad
speed corrected. Driver: Use
of ASIO caused the AES (XLR)
input to switch to Coaxial
(SPDIF). Added word clock
output option to Settings
dialog. ADAT I/O returns
correct error message in
quad speed mode. (3/2004)
Version 2.64:
New: Mute button added to
Phones section of HDSP 9632.
Slow reaction of the
Settings dialog fixed
(introduced in 2.63). Driver
deactivation fixed.
(12/2003)
Version 2.63:
Changes: Support for power
management. Improved
callback routines in
multicard operation. New:
Disconnect mode for Digiface
and Multiface. Error
detection in I/O box
improved. (12/2003)
Version 2.62(1):
Bug fixes: TotalMix routing
problem with Multiface
(introduced in 2.62). HDSP
9632 SPDIF AC-3 did not
work. Missing MIDI ports in
multi-card operation. Small
display error in TotalMix.
GSIF support for HDSP 9632
fixed. (09/2003)
Version 2.61:
New: ASIO for HDSP 9632
extended. Added support for
HDSP 9632's AI4S-192 and
AO4S-192. Improvements:
TotalMix saves files more
reliable on shut down of
Windows. Flash Update Tool
operates more reliable.
(07/03)
Version 2.60:
New: TotalMix rewritten. New
features: Matrix view,
Multiwindow view, Group
operation, Copy/Paste
operation and lots more. ADM
steers TotalMix faders.
Added support for the HDSP
9632. Added routines for
buffer misses detection. Bug
fixes: Last used sample rate
is stored reliably. ASIO
multiclient compatible to
Sonic Foundry Vegas. (07/03)
Version 2.52:
New: ASIO multi-client
operation. Bug fixes: HDSP
general: SPDIF out:
non-audio was set when not
required. ASIO double speed
compatibility improved. HDSP
9652: TotalMix settings were
not loaded automatically
into the second card.
(04/03)
Version 2.51:
New: Support for DVD
multichannel playback 4/6/8
channels (16 bit/48 kHz).
Bug fixes: HDSP general: TMS
setting wasn't stored
correctly. HDSP 9652:
TotalMix settings were not
loaded automatically into
the second card. (02/03)
Version 2.434:
ASIO erase routines added
for multiclient operation
(noise in Sonic Foundry
Vegas). Modified MIDI
handling of invalid data
(prevents crash of
Gigastudio). (02/03)
Version 2.433:
Bug fixes HDSP General: ASIO
Direct Monitoring did not
work correctly at 88.2/96
kHz. (12/02)
Version 2.432:
Bug fixes HDSP General: I/O
Box sometimes detected as
HDSP 9652 - no loading.
Setting Non-Audio Bit during
AC3 playback did not work
reliable. Changes HDSP
General: TMS (Track Marker
Support) implemented. ADAT
Double Speed is signalled in
the ADAT data stream.
FUT_11_104: New MIDI
hardware: significantly
reduced system load.
TotalMix: ASIO Direct
Monitoring can be switched
off (emagic Logic). (12/02)
Version 2.42:
Changes: HDSP general:
Non-audio bit is set
automatically when playing
back AC3 or DTS. HDSP 9652:
AEB input/output now
functional. 'ADAT1 Int.' and
'SPDIF Internal' added to
Settings dialog. (11/02)
Version 2.41:
Bug fixes: HDSP general: In
MME mode record position has
not been reliable (0 or -1
buffer deviation). HDSP
9652: 'Analog' within the
TotalMix routing menu has
been removed. Changes:
Driver simplified.
Default.vol and Preset.mix
files now integrated into
the driver. Default presets
available via CTRL key.
(10/02)
Version 2.4:
Added support for HDSP 9652.
(10/02)
Version 2.332:
On some computers MIDI
position was incorrect and
MIDI/audio position drifted.
(6/02)
Version 2.331:
Improved performance of the
second HDSP at low latency
and high CPU load. (6/02)
Version 2.33:
Latency setting not
synchronized when using more
than one card. Digiface: no
MME operation possible with
ADAT3 input only. Multiface:
Check Input did not work
with ADAT Input when no ADAT
signal was present.
TotalMix: ZLM buttons were
invisible but active, when
display of Inputs was off.
(6/02)
Version 2.323:
Start settings of TotalMix
were not correct. BPM kernel
driver did not work.
Multi-client ASIO/MME
operation did not work when
using two systems. Saving
settings on shutdown did not
work. Saving a preset
changed default.vol file.
ASIO GetClockSources fixed.
New driver: slightly
improved record performance
under MME. (5/02)
Version 2.32:
Multi-client ASIO/MME
operation did not work when
using two systems. Saving
settings on shutdown did not
work. Saving a preset
changed default.vol file.
(3/02)
Version 2.31:
New driver: No alternative
ASIO dll anymore
(audiomidifix) - this one is
now standard. Icon of the
Settings dialog is removed
when program is closed. No
display in Settings dialog
when I/O box is
disconnected. No MME/ASIO
operation when I/O box is
disconnected. Saving of the
last used sample rate. New
TotalMix: Changed 'Exit'
routines, closes program
window immediately and fixes
crash situation. Window size
wasn't maximized after
changing between single and
double speed. Arrows for
changing 'samples for over'
value were working the wrong
way. Bugfixes: Under certain
conditions Sysex data
crashed the MIDI driver.
TotalMix caused error in I/O
box detection. (3/02)
Version 2.22:
New driver: Fully
multi-client operation of
ASIO, MME and GSIF. (2/02)
Version 2.2:
New driver: GSIF support
added. ASIO reset switched
off monitoring on channel 1
(Digiface/Multiface.) New
TotalMix: graphics update
Multiface channel 9 fixed.
Bugfix: Speaker Protection
for phones out did not work
on Multiface. (2/02)
Version 2.1:
New driver: Modifications
for ZLM implementation.
Settings dialog's systray
right click menu now closes
correctly. Uninstall
improved and extended
(\Software.) New TotalMix:
Added ZLM and monitoring
modes Mix/Replace. Error in
preset 4 and 8 removed (Mute
Master was not activated.)
New Hotkeys I, O, P, S and
F2. Hotkey Alt now also
functional with Mute and
Solo. Systray right click
menu now closes correctly.
Bugfixes: ASIO SetSampleRate
did not return error when
not executed. (12/01)
Version 2.01:
I/O box detection improved.
New Flash Update Tool with
new hardware versions, now
separated into PCI card and
CardBus card (fixes problems
with Apple Titanium only so
far.) (11/01)
Version 2.0:
New driver: Completely new
I/O-box design with phase
locked inputs and outputs
(0°.) Intelligent Clock
Control. Frequency
measurement and display of
all inputs signals.
SyncCheck of all input
signals (new: SPDIF, word
clock.) Check Input also for
word clock. Complete support
for Multiface. Simultaneous
operation of Multiface and
Digiface. Extended HDSP bus
protocol. Verification of
hardware revision (firmware
of PCI-/CardBus interface.)
Weblinks added in About page
and hardware warning page.
Flash Tool for updating
(external program.) HDSP
Meter Bridge (external
program.)
New TotalMix:
Support for up to three
systems. Warning message
when trying to save presets
in write protected files.
Complete support for
Multiface. Automatic
adaptation of TotalMix in
Double Speed operation.
Dialog Level Meter Setup
Options. Always on Top.
Deactivate Screensaver.
Bugfixes:
Re-insertion of the CardBus
card. Word clock as Pref
Sync Ref wasn't activated
automatically. ADAT Sync
Clock did not work. TotalMix
crashed when trying to write
into write protected files.
(11/2001)
Version 1.01:
Bugfix: no sound under
Logic-ASIO when MME was used
first. MME device names
changed (as in W98 driver.)
(07/2001)
Version 1.0:
Initial release. Based on
Hammerfall driver v. 1.381,
plus TotalMix, complete ASIO
2.0, CardBus and Digiface
support. (06/2001)
Windows 98/SE/ME Driver
Version 2.431:
Bugfixes HDSP general: ASIO
Direct Monitoring did not
work correctly at 88.2/96
kHz. (12/02)
Version 2.43:
HDSP general: ASIO Direct
Monitoring was broken since
version 2.40 - fixed. Added
support for TMS (always
active). FUT_11_104: New
MIDI hardware: significantly
reduced system load.
TotalMix: ASIO Direct
Monitoring can be switched
off (emagic Logic). (12/02)
Version 2.42:
HDSP 9652: Added support for
AEBs. (11/02)
Version 2.4:
Added support for HDSP 9652.
(3/02)
Version 2.13:
TotalMix: ZLM buttons were
invisible but active, when
display of Inputs was off
(6/02)
Version 2.12:
Saving settings on shutdown
did not work. Saving a
preset changed default.vol
file. (3/02)
Version 2.11:
New driver: ASIO reset
switched off monitoring on
channel 1
(Digiface/Multiface.) New
TotalMix: graphics update
Multiface channel 9 fixed.
Bugfix: Speaker Protection
for phones out did not work
on Multiface. (2/02)
Version 2.1:
New driver: Modifications
for ZLM implementation.
Settings dialog's systray
right click menu now closes
correctly. Uninstall
improved and extended
(\Software.) New TotalMix:
Added ZLM and monitoring
modes Mix/Replace. Error in
preset 4 and 8 removed (Mute
Master was not activated.)
New Hotkeys I, O, P, S and
F2. Hotkey Alt now also
functional with Mute and
Solo. Systray right click
menu now closes correctly.
Bugfixes: ASIO SetSampleRate
did not return error when
not executed. (12/01)
Version 2.01:
I/O box detection improved.
New Flash Update Tool with
new hardware versions, now
separated into PCI card and
CardBus card (fixes problems
with Apple Titanium only so
far.) (11/01)
Version 2.0:
New driver: Completely new
I/O-box design with phase
locked inputs and outputs
(0°.) Intelligent Clock
Control. Frequency
measurement and display of
all inputs signals.
SyncCheck of all input
signals (new: SPDIF, word
clock.) Check Input also for
word clock. Complete support
for Multiface. Simultaneous
operation of Multiface and
Digiface. Extended HDSP bus
protocol. Verification of
hardware revision (firmware
of PCI-/CardBus interface.)
Flash Tool for updating
(external program.) HDSP
Meter Bridge (external
program.)
New TotalMix:
Support for up to three
systems. Warning message
when trying to save presets
in write protected files.
Complete support for
Multiface. Automatic
adaptation of TotalMix in
Double Speed operation.
Dialog Level Meter Setup
Options. Always on Top.
Deactivate Screensaver.
Bugfixes:
ADAT Sync Clock did not
work. (11/2001)
Version 1.01:
Bugs fixed: the file
default.mix was not copied
during installation. Mute
and Solo wasn't activated
correctly when loading a
Preset. Analog output needed
MME playback to be
activated. No click anymore
at the analog out when
booting (Speaker
Protection.) The new driver
installs 8 Presets for the
mixer. (06/2001)
Version 1.0:
Initial release. Based on
Hammerfall driver v. 2.61,
plus TotalMix, complete ASIO
2.0, CardBus and Digiface
support. (06/2001)
Mac OS X Driver
Version 1.6c (FUT
14_106_52_152):
Bugfix Multiface: The HDSP
9632 bugfix in version 1.6b
caused the Multiface to be
limited to 10 channels.
(10/2005)
Version 1.6b (FUT
14_106_52_152):
Bugfix HDSP 9632: Internal
loopback had been active
after system boot in some
cases, so that record data
seemed to be missing.
TotalMix: New menu entry
TotalMix with hotkey T. Both
menu and hotkeys now also
operate with closed windows.
MIDI remote improved (note
off). (09/2005)
Version 1.6a (FUT
14_106_52_152):
Driver constantly wrote into
the system log - fixed. New
icons for the Settings
dialog. HDSP 9652: Level
meters of TotalMix showed
wrong values. (08/2005)
Version 1.6 (FUT
14_106_52_152):
Newly programmed Settings
dialog and TotalMix,
featuring Auto Load, Dock
Lock and Auto Remove. Added
firmware revision check to
Settings dialog. Input
Offset and Output Offset
values added.
Digiface/Multiface: changed
order of AutoSync sources,
Word is now on top.
Digiface/Multiface/9652:
Improved ADAT receiver. New
option Word Clock Out Single
Speed. With Flash Update
Tool 13/51:
Digiface/Multiface: Bugfix
communication problem at
certain sample rates.
Digiface/Multiface/RPM:
Support for internal
loopback. Improved
initialisation when
re-connecting the box.
Digiface: 'Emphasis' is
valid for the analog Phones
output too. HDSP9632: New
hardware (Flash Update 152)
with internal loopback,
improved ADAT receiver and
DDS. DDS added to Settings
dialog. New TotalMix with
Monitor panel, MIDI support
and a lot more improvements
(based on current Fireface
driver 2.20). (07/2005)
Version 1.5 (g1):
New MIDI Plugin with reset
of the MIDI port names. The
extended names of driver
1.5g were not used by OS X
in case the devices had
already been there (former
driver use). (06/2005)
Version 1.5 (g):
New scheme for improved
multi-card operation. The
PCI slot number is now added
to the device name. The
order no longer changes on
reboots. (05/2005)
Version 1.5 (e):
Bugfix MIDI: Settings dialog
caused a repeated MIDI note
at the HDSP9652 and 9632
MIDI output. (11/2004)
Version 1.5 (d):
Bugfix MIDI: Bigger sysex
packets became corrupted.
(08/2004)
Version 1.5 (c):
Internal signal error in the
RPM hardware caused sample
errors on the left channels.
TotalMix displays invalid
routings, which are
generated when changing from
single to double speed, as
blank field (RPM/Multiface).
RPM default state is now
Bypass and Phono 0 dB. RPM
TotalMix routing AN 5+6
changed to Phones. Added
Presets to TotalMix for the
RPM. New TotalMix: 'Link
Faders' activates a global
stereo control of all faders
(hotkey L). Bugfix TotalMix
pans did not work correctly
when window made smaller so
that scrollbars show up (v
1.5b). (07/2004)
Version 1.5:
New MIDI driver with
rock-solid timing even on
old computers at high CPU
load. MIDI device name for
RPM corrected. (03/2004)
Version 1.4:
Added complete support for
the RPM (driver, settings,
TotalMix). Added card number
in multidevice operation to
device and each stream name.
Changed settings dialog
tabs: number and card type.
Added support for the Flash
Update Tool. Added
workaround for Apple's
Aluminum Powerbooks (freeze
fix, recognition of hardware
revision 12). Added
workaround for crash on
wakeup from sleep on dual G4
Macs. Loading TotalMix
settings on wakeup from
sleep now works for Digiface
and Multiface too. The
system profiler no longer
claims the driver to be
incompatible and not loaded.
Improvement of the PCI bus
performance. Depending on
the model of your computer
this can cause a dramatic
improvement of lower latency
with less clicks. TotalMix:
Hotkeys I O P S X added to
menu. 128 kHz, 176.4 kHz and
192 kHz added to HDSP9632.
Added option 'Word Clock Out
always Single Speed' to
HDSP9632. Settings dialog
displays word clock input
frequency also for double
and quad speed. (02/2004)
Version 1.3:
CoreMIDI: improved MIDI
timing. Added support for
power management
(resume/sleep). Disconnect
mode: Freeze of the current
hardware state with all
settings and even TotalMix.
Improved I/O Box error
detection and re-lock.
Speaker Protection on phones
out of Multiface/Digiface.
Added hotkeys to load
presets in TotalMix. All
TotalMix factory presets
have 'RMS +3 dB' activated.
TotalMix RMS release time is
now identical for single,
double and quad speed
operation. In case the I/O
box is missing at boot, the
driver will default to a
Multiface. (12/2003)
Version 1.2:
TotalMix: Matrix,
group-based operation,
copy/paste, scrolling,
multi-window operation and
delete whole routings via
selection/menu Edit have
been added. TotalMix has
been reprogrammed from
scratch for better Level
Meter and scroll
performance. General: Added
support for the HDSP 9632.
Added CoreMIDI for HDSP
9632, HDSP 9652, Digiface
and Multiface. Settings
dialogs improved,
unneccessary hard drive
access removed. (10/2003)
Version 1.1:
TotalMix: HDSP 9652:
'Analog' removed from
routing menu. Routing in 96
kHz operation was
incomplete. Driver: Higher
compatibility through
increased offset. (02/2003)
Version 1.0:
Initial release, complete
functionality based on FUT
11/104. (01/2003)
Mac OS 9.x Driver
Version 2.21:
TotalMix settings were not
loaded automatically.
(02/2003)
Version 2.20:
Modified for Flash Update
Tool 11/104. Changed
TotalMix control, new
internal bin files, improved
MIDI hardware. (01/2003)
Version 2.11:
New TotalMix: automatic exit
on shutdown. (6/2002)
Version 2.10:
New driver: OMS MIDI
support. New ASIO driver
concept with separated
drivers for single and
double speed operation.
Digibox.bin and multibox.bin
merged into the driver file.
Version resources added to
all files. Default SPDIF
input changed from optical
to coaxial.
New TotalMix:
Hotkeys I/P/O/S/L in
TotalMix (Input, Playback,
Output, Submix view, Level
meter setup dialog.) Hotkey
P (for numerical peak
display) in TotalMix changed
to E.
Bugfixes:
TotalMix Multiface bugs
fixed (graphics errors.)
(3/2002)
Version 2.01:
New TotalMix: Dialog Level
Meter Setup Options with
several settings added.
Hotkey Alt for Mute and Solo
added. (12/2001)
Version 2.0:
New driver: Intelligent
Clock Control. Frequency
measurement and display of
all input signals. SyncCheck
of all input signals (new:
SPDIF, word clock.) Complete
support for Multiface.
Simultaneous operation of
Multiface and Digiface.
Extended HDSP bus protocol.
Verification of hardware
revision (firmware of PCI-/CardBus
interface.) ASIO 96 kHz
support improved. Several
changes for compatibility to
Digital Performer. Flash
Tool for updating (external
program.)
New TotalMix:
Support for up to three
systems. Complete support
for Multiface. Automatic
adaptation of TotalMix in
Double Speed operation.
Dialog Level Meter Setup
Options.
New hardware:
new hardware versions
through flash update, now
separated into PCI card and
CardBus card (fixes
compatibility problems with
Apple Titanium.) (11/2001)
Version 0.91:
New hardware version with
phase locked I/Os (improves
compatibility to Tascam 4000
and Creamware converters.)
Small bug in TotalMix (PAN)
fixed. ADAT Sync did not
work in clock mode AutoSync
nor ADAT Sync. (9/01)
Version 0.9:
Initial release: Based on
Hammerfall driver v. 1.6,
plus TotalMix, complete ASIO
2.0, CardBus and Digiface
support. No MIDI/OMS. (7/01)
