|
 |
 |
|
Overview: |
RME presents
the world's most
versatile PCI Audio
Interface - the
Hammerfall DSP 9632.
This card makes the
dream of an
All-In-One solution
for every possible
application come
true. As usual, RME
has not made any
compromises: Latest
192 kHz AD- and
DA-converters with
more than 110 dB
signal to noise
ratio, all inputs
and outputs
simultaneously
operational,
easy-to-install
optional hi-quality
analog expansion
boards, the famous
TotalMix, a newly
developed
sensational clock
section with maximum
jitter suppression
of external clock
signals - all this
combines into a
'soundcard' that the
world has been
waiting for so long.
|
|
Connectivity |
- 1 x Analog I/O (192 kHz)
- 1 x ADAT I/O (at 96 kHz over S/MUX)
- 1 x SPDIF I/O (192 kHz)
- 1 x MIDI I/O
- 1 x Phones-Output
- TotalMix
- Expansion Boards (optional)
|
|
|
|
|
|
Features: |
The HDSP 9632
provides unique
features:
-
Balanced stereo
analog in- and
output,
24-Bit/192kHz, >
110 dB SNR
-
Optional analog
expansion boards
with 4 balanced
in- or outputs
-
All analog I/Os
capable of 192
kHz, constant
number of
available
channels
-
1 ADAT digital
I/O, supporting
96 kHz S/MUX
operation
-
1 SPDIF digital
I/O, 192
kHz-capable
-
1 Breakout cable
for coaxial
SPDIF*
-
Up to 16 I/Os
can be used
simultaneously!
-
1 Stereo
headphone
output, parallel
to the analog
out, additional
level settings
-
1 MIDI I/O with
16 channels of
hi-speed MIDI
via breakout
cable
-
DIGICheck,
RMEs unique
metering- and
analysing tool
-
HDSP Meter
Bridge: freely
scalable level
meters, peak-
and RMS
calculation
directly in
hardware
-
TotalMix: 512
channel Mixer
with 40 Bit
internal
resolution
* The HDSP 9632
ships in a basic
version including
two RCA/phono
breakout cables
(headphone: TRS
jack). Therefore all
analog I/Os and the
SPDIF I/O are
unbalanced. XLR
breakout cables are
available as an
option (headphone:
Neutrik TRS locking
jack), turning
analog and AES/EBU
into balanced mode.
HDSP 9632 debuts
SteadyClock
(TM), a newly
developed clock
technology,
combining
professional
features like
maximum jitter
suppression at full
varipitch
capabilities and
software controlled
sample rates.
|
|
Settings: |
Just click on the
hammer symbol in the
systray of the
taskbar and the
settings dialog
of the HDSP 9632
comes up. The clear
structured, easy to
understand window
plus the unique
informative status
windows for input
signal, clock mode
and sample rate make
your work with
Hammerfall DSP to a
real pleasure.
When working with
several digital
sources it is not
only necessary to
know if these are
properly locked, but
also if they are
totally
synchronized. RMEs
exclusive
concept you have all
clocks and states
under control - with
ease.
The optional 9632
Word Clock Module
provides a
galvanically
isolated word clock
input and two word
clock outputs via
BNC jacks. Compared
to the well-known
DIGI96/8 series, the
HDSP 9632 not only
offers a further
improved analog
interface, but also
all the features of
the award-winning
Hammerfall DSP
series: All inputs
and outputs
simultaneously
available, MIDI I/O
and TotalMix, the
DSP-based realtime
mixer/router.
Hardware updates
through software and
driver updates are
risk-free thanks to
the Secure BIOS
Technology.
In short: The HDSP
9632 is the ultimate
audio interface for
PC or Mac, digital
or analog.
|
|
Tech Specs: |
8 buffer sizes/latencies available:
1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93
ms, 186 ms
ASIO zero CPU load technology:
0 (zero!)% CPU load when using ALL
128 channels!
All settings: changeable in
realtime
Clock modes: slave and master
Automatic and intelligent
master/slave clock control
Enhanced Mixed mode:
All inputs and outputs
simultaneously operational
TMS (Track Marker
Support):
Supports CD/DAT
start-IDs and the
read out of CD
subcode
Unique status
windows for record
and playback,
showing mode and
sample rate
DIGICheck, RMEs
unique metering and
analysing tool
Digital inputs and
outputs ground-free
transformer coupled
3-stage hardware
level control for
analog inputs and
outputs
Servo-balanced
analog input and
output, DC-coupled
signal path
192 kHz / 24-Bit
converters. SNR 110
dB RMS unweighted,
113 dBA
Maximum input and
output level (0 dBFS
@ HiGain): +19 dBu
Low impedance
headphone output (75
ohm), stepless
output level through
software faders
Headphone Speaker
Protection minimizes
noise during power
on/off
Enhanced Mixed Mode:
Super low jitter
design: < 1 ns in
all clock modes
|
|
Optional Add-ons: |
An easy to handle ribbon cable connects the
newly developed optional AI4S-192 and
AO4S-192. These analog expansion boards
having one bracket with 4 stereo TRS jacks
offer the same performance as the on-board
stereo analog I/O of the HDSP 9632: up to
192 Khz, balanced and 3 different reference
levels. With this a maximum of 6 inputs
and/or outputs can be achieved. HDSP 9632
also supports the existing Expansion Boards
(EXB). An internal ADAT input and an
internal ADAT output allow for up to 14
analog inputs, 14 analog outputs, or the
usage of a TDIF interface, directly inside
the computer.
HDSP 9632 supports also the other Expansion
Boards. The internal ADAT input and the
internal ADAT output provide up to 14 analog
inputs, 14 analog outputs or one TDIF I/O
direct into the system.
The following examples show some incredible
combinations:
Description (from left to right):
-
WCM: One Word Clock Module for one
input and two outputs, 24-Bit/192kHz, >
110 dB SNR
-
WCM +
TEB: Word Clock module and TEB for
one additional TDIF Port
-
4AI + 4AO: 4 analog inputs and
analog outputs
-
4AI + 4AO +
TEB: 4 analog I/Os and one TEB
-
AEB: with the AEB-4I/8I/4O/8O for up
to 14 analog I/Os
Our recommendation for a killer combo:
HDSP 9632 +
WCM +
AI4S-192 +
AO4S-192 +
TEB = all usable at the same time, one
PCI(e) Slot and 4 additonal slots
|
|
Expansion Boards - B. AI 4S/192 - 4 analog
inputs with 192 kHz analog-digital converters or AEB
4O / AEB 8I - 4/8 analog outputs with 96 kHz
digital-analog converters |
|
|
|
|
|
